Discharge control
for water injected screw compressors
Discharge control components ensure that the minimum water flow required for cooling and lubricating the compressor is maintained during start-up and off-load and when the user lines are fully open. Optional combination with filtrations possible.
Ensure the water flow by keeping a minimum pressure level in the compressor. The integrated check valve prevents back flow from air-net during stop and idling.
MPVL:
Functional tube connector/ Component of the pressure line after water separation
MPVL ETS:
Allows integration into customer components (e.g. separator tank, air cooler)
All components corrosion free/protected.
- Volume air flow:
- MPVL: 0.6 to 200 Nm3/min I 22 to 7100 scfm
MPVL ETS: Depends on customer Housing - Maximum working pressure:
- Standard 16 barg I 232 psig
High pressure 40 barg I 580 psig on demand - Ambient temperature:
- 5 to 80 °C I 41 to 176 °F
- Inlet/outlet connections:
- Threaded or flanged
Type: MPVL15-80, MPVL3" and MPVL4"
Combination of minimum pressure valve and air/water separator.
All components corrosion free/protected.
- Volume air flow:
- 5 to 26 Nm3/min I 205 to 920 scfm
- Maximum working pressure:
- 16 barg I 232 psig
- Ambient temperature:
- 5 to 80 °C I 41 to 176 °F
How can we help you?
Let us know how we can help you with your existing or future projects, and one of our sales or support representatives will contact you shortly.
Don't miss anything!
In order to receive updates and news regarding HOERBIGER Compression Division and its products and services, please subscribe for our newsletter now!